Thesis: Desarrollo y caracterización de membranas a partir de poliestireno expandido y solventes verdes
Date
Journal Title
Journal ISSN
Volume Title
Degree
Campus
Publisher
Abstract
La creciente escasez hídrica a nivel global y nacional ha impulsado el desarrollo de tecnologías para la obtención de agua de fuentes no convencionales, como el agua de mar. Dentro de estas encontramos las membranas, que son barreras sólidas que permiten separar elementos de manera selectiva gracias a la aplicación de una fuerza impulsora. Sin embargo, la fabricación tradicional resulta poco sostenible por el uso de polímeros derivados del petróleo y solventes altamente contaminantes; además de su corta vida útil que genera volúmenes considerables de residuos. Ante esta problemática, se planteó la hipótesis de que es posible fabricar membranas a partir de poliestireno expandido (EPS) y solventes: d-limoneno y Trioctil trimelitato (TOTM), empleando nuevas condiciones de diseño y operación que potencien sus propiedades fisicoquímicas y maximicen su rendimiento. En base a esto, el objetivo de esta investigación consistió en desarrollar a nivel laboratorio membranas filtrantes a partir de EPS y solventes verdes para el tratamiento de agua. El trabajo se estructuró en 3 etapas: i) evaluar las condiciones de diseño que permiten obtener membranas viables estructuralmente; ii) evaluar el desempeño bajo distintas condiciones de operación, iii) y caracterizar las propiedades fisicoquímicas y morfológicas para su clasificación y proyección a gran escala. Para ello, se planteó un diseño factorial completo para evaluar el efecto de 5 variables: tipo de solvente verde (d-limoneno y TOTM), concentración de polímero (15%, 20% y 25% p/p), concentración de PVP (0%, 0,75% y 1,5% p/p), espesor de película (200 y 300 μm) y soporte mecánico (con o sin TNT). Con ello se fabricaron un total de 36 modelos de membranas diferentes, los cuales fueron evaluados mediante (...).
The growing global and national water scarcity has driven the development of technologies to obtain water from unconventional sources, such as seawater. Among these are membranes—solid barriers that allow for the selective separation of components through the application of a driving force. However, traditional manufacturing methods are often unsustainable due to the use of petroleum-derived polymers and highly polluting solvents; furthermore, their short service life generates significant volumes of waste. Given these challenges, it was hypothesized that it is possible to fabricate membranes using expanded polystyrene (EPS) and specific solvents—d-limonene and trioctyl trimellitate (TOTM)—by employing novel design and operational conditions that enhance their physicochemical properties and maximize their performance. Consequently, the objective of this research was to develop, at a laboratory scale, filtration membranes derived from EPS and "green" solvents for water treatment. The study was structured into three stages: i) evaluating design conditions to produce structurally viable membranes; ii) assessing performance under various operational conditions; and iii) characterizing the physicochemical and morphological properties for classification and potential large-scale application. To this end, a full factorial design was employed to evaluate the effects of five variables: type of green solvent (d-limonene or TOTM), polymer concentration (15%, 20%, and 25% w/w), PVP concentration (0%, 0.75%, and 1.5% w/w), film thickness (200 and 300 μm), and the presence of a mechanical support (with or without a non-woven fabric). In total, 36 different membrane models were fabricated and evaluated through (...).
